# $Id$
#
# Makefile for the CUDD distribution kit
#---------------------------------------------------------------------------

# Beginning of the configuration section. These symbol definitions can
# be overridden from the command line.

# C++ compiler
CXX	= g++
#CXX	= icpc
#CXX	= ecpc
#CXX	= CC
#CXX	= /usr/local/opt/SUNWspro/bin/CC
#CXX	= cxx

# Specific options for compilation of C++ files.
CXXFLAGS =
# Stricter standard conformance for g++.
#CXXFLAGS = -std=c++98
# For Sun CC version 5, this invokes compatibility mode.
#CXXFLAGS = -compat
# On some versions of UP-UX, it is necessary to pass the option +a1
# to CC for the C++ test program to compile successfully.
#CXXFLAGS = +a1

# C compiler used for all targets except optimize_dec, which always uses cc.
#CC	= cc
#CC	= /usr/local/opt/SUNWspro/bin/cc
CC	= gcc
#CC	= icc
#CC	= ecc
#CC	= /usr/ucb/cc
#CC	= c89
#CC	= $(CXX)

# On some machines ranlib is either non-existent or redundant.
# Use the following definition if your machine has ranlib and you think
# it is needed.
RANLIB	= ranlib
# Use the following definition if your machine either does not have
# ranlib (e.g., SUN running solaris) or can do without it (e.g., DEC Alpha).
#RANLIB	= :

# Use ICFLAGS to specify machine-independent compilation flags.
# These three are typical settings for cc.
#ICFLAGS	= -g
#ICFLAGS	= -O
#ICFLAGS	=
# These two are typical settings for optimized code with gcc.
#ICFLAGS	= -g -O3 -Wall
ICFLAGS	= -O3

# Use XCFLAGS to specify machine-dependent compilation flags.
# For some platforms no special flags are needed.
#XCFLAGS	= -DHAVE_IEEE_754 -DBSD
#
#==========================
#
#  Windows 95/98/NT/XP/Vista with Cygwin tools
#
# The value of RLIMIT_DATA_DEFAULT should reflect the amount of
# available memory (expressed in bytes).
# Recent versions of cygwin have getrlimit, but the datasize limit
# cannot be set.
XCFLAGS	= -mtune=native -malign-double -DHAVE_IEEE_754 -DHAVE_GETRLIMIT=0 -DRLIMIT_DATA_DEFAULT=268435456 -DBSD -DSIZEOF_VOID_P=8 -DSIZEOF_LONG=8


# Define the level of self-checking and verbosity of the CUDD package.
#DDDEBUG = -DDD_DEBUG -DDD_VERBOSE -DDD_STATS -DDD_CACHE_PROFILE -DDD_UNIQUE_PROFILE -DDD_COUNT
DDDEBUG	=

# Define the level of self-checking and verbosity of the MTR package.
#MTRDEBUG = -DMTR_DEBUG
MTRDEBUG =

# Loader options.
LDFLAGS	=
# This may produce faster code on the DECstations.
#LDFLAGS	= -jmpopt -Olimit 1000
# This may be necessary under some old versions of Linux.
#LDFLAGS	= -static
# This normally makes the program faster on the DEC Alphas.
#LDFLAGS	= -non_shared -om
# This is for 32-bit pointers on the DEC Alphas.
#LDFLAGS	= -non_shared -om -taso
#LDFLAGS	= -non_shared -taso

# Define PURE as purify to link with purify.
# Define PURE as quantify to link with quantify.
# Remember to compile with -g if you want line-by-line info with quantify.
PURE =
#PURE	= purify
#PURE	= quantify

# Define EXE as .exe for MS-DOS and derivatives.  Not required by recent
# versions of cygwin.
EXE	=
#EXE	= .exe

# End of the configuration section.
#---------------------------------------------------------------------------

MFLAG   = -DMNEMOSYNE
MNEMLIB	= ../mnemosyne/libmnem.a

DDWDIR	= .
IDIR	= $(DDWDIR)/include
INCLUDE = -I$(IDIR)

BDIRS	= cudd dddmp mtr st util epd
DIRS	= $(BDIRS) obj

#------------------------------------------------------------------------

.PHONY : build
.PHONY : optimize_dec
.PHONY : libobj
.PHONY : lint
.PHONY : all
.PHONY : clean
.PHONY : distclean


build:
	sh ./setup.sh
	@+for dir in $(DIRS); do \
		(cd $$dir; \
		echo Making $$dir ...; \
		make CC=$(CC) RANLIB=$(RANLIB) MFLAG= MNEMLIB= ICFLAGS="$(ICFLAGS)" XCFLAGS="$(XCFLAGS)" DDDEBUG="$(DDDEBUG)" MTRDEBUG="$(MTRDEBUG)" LDFLAGS="$(LDFLAGS)" PURE="$(PURE)" EXE="$(EXE)" )\
	done

optimize_dec:
	sh ./setup.sh
	@+for dir in $(DIRS); do \
		(cd $$dir; \
		echo Making $$dir ...; \
		make CC=$(CC) RANLIB=$(RANLIB) XCFLAGS="$(XCFLAGS)" LDFLAGS="$(LDFLAGS)" optimize_dec )\
	done

lint:
	sh ./setup.sh
	@+for dir in $(DIRS) obj; do \
		(cd $$dir; \
		echo Making lint in $$dir ...; \
		make CC=$(CC) lint )\
	done

tags:
	sh ./setup.sh
	@+for dir in $(DIRS) obj; do \
		(cd $$dir; \
		echo Making tags in $$dir ...; \
		make CC=$(CC) tags )\
	done

all:
	sh ./setup.sh
	@+for dir in $(DIRS); do \
		(cd $$dir; \
		echo Making all in $$dir ...; \
		make CC=$(CC) RANLIB=$(RANLIB) MFLAG= MNEMLIB= ICFLAGS="$(ICFLAGS)" XCFLAGS="$(XCFLAGS)" DDDEBUG="$(DDDEBUG)" MTRDEBUG="$(MTRDEBUG)" LDFLAGS="$(LDFLAGS)" PURE="$(PURE)" EXE="$(EXE)" all )\
	done

objlib:
	sh ./setup.sh
	@+for dir in $(BDIRS); do \
		(cd $$dir; \
		echo Making $$dir ...; \
		make CC=$(CC) RANLIB=$(RANLIB) MFLAG= MNEMLIB= ICFLAGS="$(ICFLAGS)" XCFLAGS="$(XCFLAGS)" DDDEBUG="$(DDDEBUG)" MTRDEBUG="$(MTRDEBUG)" LDFLAGS="$(LDFLAGS)" PURE="$(PURE)" EXE="$(EXE)" )\
	done
	@+(cd obj; \
	echo Making obj ...; \
	make CPP=$(CPP) CPPFLAGS=$(CPPFLAGS) RANLIB=$(RANLIB) MFLAG= MNEMLIB= ICFLAGS="$(ICFLAGS)" XCFLAGS="$(XCFLAGS)" DDDEBUG="$(DDDEBUG)" MTRDEBUG="$(MTRDEBUG)" LDFLAGS="$(LDFLAGS)" PURE="$(PURE)" EXE="$(EXE)" )

clean:
	@+for dir in  cudd dddmp mtr st util epd obj ; do	\
	    (cd $$dir;	\
	     echo Cleaning $$dir ...; \
	     make -s clean; \
	     rm -f *.a; \
			 cd ..; \
			 echo Deleting include...; \
			 rm -fr include	) \
	done


distclean:
	@+for dir in cudd dddmp mtr st util epd obj ; do	\
	    (cd $$dir;	\
	     echo Cleaning $$dir ...; \
	     make -s EXE="$(EXE)" distclean; \
	     rm -f *.a; \
			 cd ..; \
			 echo Deleting include...; \
			 rm -fr include	) \
	done
	sh ./shutdown.sh
